Skip to Main Content

How did Israel and Saudi Arabia survive one of the driest periods in the last 1000 years?


The Levant region along the Eastern Mediterranean, just north of the Arabian desert, is no stranger to drought and water resource shortages. Summers are typically dry with minimal rainfall and rainy seasons only bring three to four days of rain at a time alternating with dry spells lasting from four to fifteen days.

The Levant Region. Image Source: Google Maps


Over the last 50 years, the climate has become even dryer with precipitation decreasing and aridity increasing, putting a strain on drinking water resources and agricultural activities. In 2014, NASA identified the years of 1998-2002 as one of the driest periods in the Mediterranean over the last millennium, adding more pressure to the challenges already facing the Middle East.

Israel, situated in a sensitive climatic position, transitions from the sub-humid Mediterranean climate in the North-West to the arid climates of the Judean, Negev, and Arava deserts located along the Eastern and Southern borders. Yet, despite its location in the drylands, residents use domestic water at a rate of approximately 260 litres per capita per day, while total freshwater withdrawals average 260% of the internal resources available annually. Just a little further South-East of Israel is Saudi Arabia, which spans almost the entire Arabian desert and manages to supply domestic water to its residents to the tune of 265 liters per capita per day, and withdraws a staggering 900% of its total internal freshwater annually.

Compare that to Canada which taps into less than 2% of its internal resources despite a similar consumption rate, and the USA, which withdraws just over 17% of its internal resources and consumes roughly 330 litres of domestic water per capita per day.


So, where does Israel and Saudi Arabia get their water?

While withdrawal from non-renewable aquifers also bumps up these rates, desalination is one of the most significant contributors to domestic water resources in both Israel and Saudi Arabia, supplying over 50% of the domestic water in both countries with roughly 600 million cubic meters in Israel and over 1 billion cubic meters annually in Saudi Arabia.

Shuaibah IWPP (Integrated Water and Power Plant) in Saudi Arabia built by Doosan. Image Source: link


How does desalination work?

In desalination processes, seawater or brackish water flows through screens that remove debris and seaweed while subsequent coagulation and flocculation treatment processes remove larger solids before water is forced through membrane filtration units – typically reverse osmosis (RO) or nanofiltration (NF). These semi-permeable membranes remove salt and other large molecules, allowing only clean water to pass through.

The good news is that seawater is a renewable resource, the bad news is that it’s extremely energy intensive and expensive.

Due to the high influx of microorganisms in the seawater and the build-up of nutrients on the membranes, biofouling is one of the biggest challenges desalination plants face. Microbes proliferate on membrane surfaces, blocking pores and increasing the energy required to pump water through. This leads to significant energy demands and frequent chemical treatments which are harsh on membranes and can reduce their lifespan.

The Sorek desalination plant, located in Tel-Aviv, Israel, with biofouling expert Edo Bar-Zeev, developed an innovative, chemical-free approach to mitigate against biofouling. The seawater is passed through porous lava stone which functions somewhat like a wastewater trickling filter or biologically active filter, giving the microbes somewhere to settle before reaching the RO unit and protecting the membranes. For a plant like Sorek, with roughly 50,000 membranes, this makes a significant difference in energy demands and cleaning cycle frequency.

Researchers are also working to reduce the amount of fouling on membranes by adjusting the materials used and the surface properties of the membranes; smoother surfaces and more hydrophilic membranes can provide a barrier to adhesion while a low surface energy can ensure foulants are easily washed away.

As the planet faces more and more significant water shortages, solutions like these can help make desalination a more feasible and sustainable option to help meet the growing demand for safe domestic water. LuminUltra’s rapid microbiological monitoring technology can also help in the quest to manage microorganisms by providing users the ability to measure the total biological population in less than 5 minutes. See how it can be used to calculate a membrane “fouling index” to help operators manage and optimize process efficiency in this Application Note.

For more information on desalination, here are the “Top 10 questions about desalination” answered by Lauren Williams at the Orange County Register.


LuminUltra Team

Founded in 1995, LuminUltra is a global leader in applied molecular biology diagnostics, with solutions and services that deliver accurate and actionable feedback in bioprocessing, biofouling, and biosecurity applications. With operations in six countries, LuminUltra serves dozens of Fortune 500 customers across more than 100 countries. At the same time, LuminUltra fosters a culture of innovation and agility, working tirelessly to deliver more value to customers. In recent years it has been on an accelerated growth path, acquiring multiple companies after forming a partnership with XPV Water Partners.  

Related Posts

Your browser is out of date!

Update your browser to view this website correctly. Update my browser now