How often should I measure ATP in my wastewater treatment plant?


LuminUltra’s 2nd Generation ATP has many potential uses within a wastewater treatment plant (WWTP), including: diagnosing acute and chronic toxicity, optimizing solids concentrations in the aeration tank, optimizing dissolved oxygen setpoints and identifying sludge bulking events. How often you should measure ATP depends on the quantity of data you’ve collected, the operational performance of your WWTP and the types of wastewater inputs you receive. When you first start using ATP, it is recommended that you conduct an initial round of baseline monitoring. This includes sampling approximately 20 times over a 2-4 week period. All WWTPs are slightly different, therefore the initial baseline will allow you to assess the current operational status of your plant and allow you to set goals for continuous improvement.

Once the initial baseline monitoring has been conducted, you can start either routine monitoring or corrective action monitoring. Routine monitoring is less intensive than the initial baseline monitoring and is used primarily to identify toxicity or sludge bulking events. For toxicity monitoring, the frequency should be dependent on the risk of a toxicity event and subsequent WWTP upset. Systems with a high risk of toxicity, such as those with multiple industrial inputs, should monitor ATP more frequently than systems with a lower risk of toxicity, such as those with only municipal inputs. For sludge bulking, ATP has been shown to identify a sludge bulking event up to 2 weeks earlier than sludge-volume-index. Therefore, floc bulking ATP monitoring frequency should occur more often than once every 2 weeks, in order to realize the benefits of early detection. Corrective action monitoring should be done when process changes (such as solids optimizations) are done to ensure the necessary data and feedback is gathered to assess the impact of the changes. The frequency of monitoring when corrective actions are occurring should be similar to the initial baseline monitoring period.

Establishing a routine monitoring plan for ATP will ensure that you’re able to take preventative action to reduce risk rather than always taking corrective action after a problem turns into a full system upset.

See also:

We handpicked one of our popular writings on a similar topic – Case Study: Early Warning of Upsets and Toxicity in Wastewater Treatment.

This case study provides an overview of the strategy that can be utilized using 2nd Generation ATP monitoring as a routine test to assess the impacts of outplant toxicity and trace it to its source.

Check it out.


Jordan Schmidt

Jordan has a PhD in Civil Engineering specializing in biological wastewater treatment. During his PhD, Jordan contributed to full-scale field evaluations of municipal waste stabilization ponds in the Canadian territory of Nunavut. He has a diverse background of expertise including data science, experimental design, statistical programming and full-scale municipal wastewater treatment. When he’s not working, Jordan enjoys sea kayaking, backcountry camping in Kejimkujik National Park and rock climbing.

Related Posts

Most Wanted Microbes – Candidatus Accumulibacter

From the editor: This is the eleventh post in an ongoing series profiling microorganisms of particular significance in water and wastewater systems. In this series we will cover microorganisms of many types including some that are beneficial, inhibitory and pathogenic. Candidatus Accumulibacter is a phosphorus accumulating organism (PAOs), meaning it can store copious quantities of phosphorus under specific conditions in a process referred to as enhanced biological phosphorus removal. Systems that select for Candidatus… Read More

The DNA Revolution for Water Professionals

  Imagine trying to solve a problem when you are provided just 1% of the total data. This is essentially the case in analyzing water and wastewater microbiomes. Conventional microbiological testing methods such as culture and microscopy can identify only about 1% of microorganisms that are contained in a typical environmental sample. The remaining 99%… Read More

3 Things That You Can Learn on the First Day of ATP Testing at Your Wastewater Plant

  Of all the applications that LuminUltra works with, biological wastewater may be the most complex but also offers the greatest opportunities for cost savings and overall optimization. The greatest savings tend to come through process optimization once long-term data trends have been established but the following is a list of opportunities that present themselves… Read More